Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 145)

Publication 2100-UM001B-EN-P – January 2001
DeviceNet to SCANport Communication Module with Digital Inputs Parameters B-19
11 Fault Cfg Logic 0 – 65535 0 Yes No Provides the logic command data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
12 Fault Cfg Ref 0 – 65535 0 Yes No Provides the analog reference data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
13 Fault Cfg A1 In 0 – 65535 0 Yes No Provides the first word of datalink A data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
14 Fault Cfg A2 In 0 – 65535 0 Yes No Provides the second word of datalink A data to
the SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
15 Fault Cfg B1 In 0 – 65535 0 Yes No Provides the first word of datalink B data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
16 Fault Cfg B2 In 0 – 65535 0 Yes No Provides the second word of datalink B data to
the SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
17 Fault Cfg C1 In 0 – 65535 0 Yes No Provides the first word of datalink C data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
18 Fault Cfg C2 In 0 – 65535 0 No No Provides the second word of datalink C data to
the SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
19 Fault Cfg D1 In 0 – 65535 0 Yes No Provides the first word of datalink D data to the
SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
20 Fault Cfg D2 In 0 – 65535 0 Yes No Provides the second word of datalink D data to
the SCANport product when the adapter is
instructed to use the values for the Fault Cfg
parameters.
21 Digital Input xxxx 0000 -
xxxx 1111
NA No No Digital Input Status.
1 = power applied to Input
0 = no power at Input
# Name
Valid Values/
Settings
Default Writable
Reset or
Power
Cycle
Description
Important: For information on accessing and editing parameters, refer to Chapter 3, Configuring the DeviceNet to SCANport
Communication Module with Digital Inputs.