Delete sntpserver peer|ipaddress – Allied Telesis AT-S62 User Manual

Page 97

Text mode
Original mode

AT-S62 Management Software Command Line Interface User’s Guide

Section I: Basic Operations

DELETE SNTPSERVER PEER|IPADDRESS

Syntax

delete sntpserver peer|ipaddress=

ipaddress

Parameter

peer or

Specifies the IP address of an SNTP server. The

ipaddress

parameters are equivalent.

Description

This command deletes the IP address of the SNTP server from the SNTP
client software on the switch and returns the parameter to the default value
of 0.0.0.0. To view the IP address, refer to “SHOW SNTP” on page 104.

Example

The following command deletes the SNTP server with the IP address
148.35.16.248:

delete sntpserver ipaddress=148.35.16.248