Allied Telesis AT-S62 - Manual (Page 167)

167
Chapter 9
Static Port Trunking Commands
This chapter contains the following commands:
ˆ “ADD SWITCH TRUNK” on page 168
ˆ “CREATE SWITCH TRUNK” on page 170
ˆ “DELETE SWITCH TRUNK” on page 172
ˆ “DESTROY SWITCH TRUNK” on page 173
ˆ “SET SWITCH TRUNK” on page 174
ˆ “SHOW SWITCH TRUNK” on page 175
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information, refer to Chapter 8, “Static and LACP
Port Trunks” in the AT-S62 Management Software Menus Interface
User’s Guide.