Allied Telesis AT-S62 - Manual (Page 605)

AT-S62 Management Software Command Line Interface User’s Guide
Section VII: Management Security 605
DELETE PKI CERTIFICATE
Syntax
delete pki certificate=" name "
Parameter
certificate Specifies the name of the certificate you want to
delete from the certificate database. The name is
case sensitive. If the name contains spaces, it must
be enclosed in double quotes. Wildcards are not
allowed.
Description
This command deletes a certificate from the switch’s certificate database.
To view the certificates in the database, refer to “SHOW PKI
CERTIFICATE” on page 612.
Deleting a certificate from the database does not delete it from the file
system. To delete a file from the file system, refer to “DELETE FILE” on
page 203.
You cannot delete a certificate from the database if you specified its
corresponding encryption key as the active key in the web server
configuration. The switch considers the certificate to be in use and will not
allow you to delete it. You must first configure the web server with another
encryption key pair for a different certificate.
Example
The following command deletes the certificate “Switch 12 certificate” from
the certificate database:
delete pki certificate="Switch 12 certificate"