Allied Telesis AT-S62 - Manual (Page 570)

Chapter 31: 802.1x Port-based Network Access Control Commands
570 Section VI: Port Security
SHOW PORTACCESS|PORTAUTH
Syntax
show portaccess|portauth=8021x|macbased [config] [status]
Parameters
portaccess or Specifies the authenticator method of the
portauth port. Options are:
8021x Displays information for an 802.1x
authenticator port.
macbased Displays information for a MAC address-
based authenticator port.
config Displays the 802.1x settings for all authenticator and
supplicant ports.
status Displays the role and status of each port.
Description
This command displays the port roles. Figure 50 is an example of the
information displayed by this command.
Figure 50. SHOW PORTACCESS|PORTAUTH Command
802.1x Authentication Information
---------------------------------------------------
SystemAuthControl.................. Disabled
Number of 802.1x Supplicants....... 0 (480)
Port Role Supplicant Protocol
Mode Version
---------------------------------------------------
1
Authenticator Single 1
2 Authenticator Single 1
3 Authenticator Single 1
4 Authenticator Single 1
5 Authenticator Single 1
6 Authenticator Single 1
7 Authenticator Single 1
8 Authenticator Single 1