beautypg.com

Destroy snmp community – Allied Telesis AT-S62 User Manual

Page 113

background image

AT-S62 Management Software Command Line Interface User’s Guide

Section I: Basic Operations

113

DESTROY SNMP COMMUNITY

Syntax

destroy snmp community=

community

Parameter

community

Specifies an SNMP community string to delete from the

switch. This parameter is case sensitive.

Description

This command deletes an SNMP community string from the switch. IP
addresses of management stations and SNMP trap receivers assigned to
the community string are deleted as well.

Example

The following command deletes the community string “wind44”:

destroy snmp community=wind44