Allied Telesis AT-S62 - Manual (Page 646)

Chapter 38: Management ACL Commands
646 Section VII: Management Security
SHOW MGMTACL
Syntax
show mgmtacl [id= value ]
Parameters
id Specifies the ID number of an ACE to view.
Description
This command displays the state of the Management ACL and ACL
entries. Figure 54 is an example of the information displayed by this
command.
Figure 54. SHOW MGMTACL Command with ENTRIES Option
For an explanation of the parameters, refer to “CREATE MGMTACL” on
page 639.
Examples
The following command displays the status of all the ACEs in the
Management ACL:
show mgmtacl
The following command displays just the details of ACE ID 14:
show mgmtacl id=14
Management ACL Status ......................... Disable
ID IP Address Mask Application
----------------------------------------------------------
1
149.44.44.44 255.255.255.255 TELNET
2 149.55.55.0 255.255.255.0 ALL