Allied Telesis AT-S62 - Manual (Page 74)

Chapter 3: Basic Switch Commands
74 Section I: Basic Operations
Examples
The following command displays all the switch parameter settings that
have been changed from their default values:
show config dynamic
The following command displays the non-default parameter settings for
IGMP snooping:
show config dynamic=igmpsnoop
SWITCH Switch console timer, console startup mode,
serial port baud rate, Telnet server
SYSTEM Administrator name, switch name, and switch
location
VLAN Port-based and tagged VLANs, and multiple
VLAN modes
Table 2. Module Variable (Continued)
Variable Description