Allied Telesis AT-S62 - Manual (Page 359)

359
Chapter 21
Power Over Ethernet Commands
This chapter contains the following commands:
ˆ “DISABLE POE PORT” on page 360
ˆ “ENABLE POE PORT” on page 361
ˆ “SET POE PORT” on page 362
ˆ “SET POE THRESHOLD” on page 364
ˆ “SHOW POE CONFIG” on page 365
ˆ “SHOW POE STATUS” on page 366
Note
This chapter only applies to the AT-8524POE switch.
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to Chapter 19, “Power Over Ethernet” in the AT-S62
Management Software Menus Interface User’s Guide for
background information on Power over Ethernet (PoE).