Allied Telesis AT-S62 - Manual (Page 143)

AT-S62 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 143
set switch port=all unkucastratelimiting=enabled
This command changes the rate limit to 15,000 packets on an AT-8524M
switch that does not have an expansion module in expansion slot 26:
set switch port=1-25 rate=15000
The following command deactivates unicast rate filtering on all ports in an
AT-8516F/SC switch with no expansion modules:
set switch port=1-16 unkucastratelimiting=disabled