Allied Telesis AT-S62 - Manual (Page 598)

Chapter 34: Public Key Infrastructure (PKI) Certificate Commands
598 Section VII: Management Security
ADD PKI CERTIFICATE
Syntax
add pki certificate=" name " location=" filename .cer"
[trusted=yes|no|on|off|true|false] [type=ca|ee|self]
Parameters
certificate Specifies a name for the certificate. This is the name
for the certificate as it will appear in the certificate
database list. The name can up to 40 alphanumeric
characters. Spaces are allowed. If the name contains
spaces, it must be enclosed in double quotes. Each
certificate must be given a unique name.
location Specifies the filename of the certificate, with the “.cer”
file extension, as it is stored in the switch’s file
system.
trusted Specifies whether or not the certificate is from a
trusted CA. The options are:
yes, on, true Specifies that the certificate is from a
trusted CA. This is the default.
no, off, false Specifies that the certificate is not
from a trusted CA.
type Specifies the type of certificate being added. The
options are:
ca Tags the certificate as a CA
certificate.
ee Tags the certificate as belonging to
another end entity (EE). This is the
default.
self Tags the certificate as its own.
Description
This command adds a certificate to the certificate database from the
AT-S62 file system. To view the certificate files in the file system, refer to
“SHOW FILE” on page 208. To view the certificates already in the
database, refer to “SHOW PKI CERTIFICATE” on page 612.