Allied Telesis AT-S62 - Manual (Page 406)

Chapter 23: SNMPv3 Commands
406 Section III: SNMPv3
DELETE SNMPV3 USER
Syntax
delete snmpv3 user= user
Parameters
user Specifies the name of an SNMPv3 user to delete
from the switch.
Description
This command deletes an SNMPv3 User Table entry. After you delete an
SNMPv3 user from the switch, you cannot recover it.
Examples
The following command deletes the user named “wilson890.”
delete snmpv3 user=wilson890
The following command deletes the user named “75murthy75.”
delete snmpv3 user=75murthy75