Allied Telesis AT-S62 - Manual (Page 119)

AT-S62 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 119
ENABLE SNMP COMMUNITY
Syntax
enable snmp community= community
Parameter
community Specifies an SNMP community string. This
parameter is case sensitive.
Description
This command activates a community string on the switch. The default
setting for a new community string is enabled. You can use this command
to enable a community string that you disabled with the DISABLE SNMP
COMMUNITY command.
Example
The following command enables the SNMP community string “private”:
enable snmp community=private