Allied Telesis AT-S62 - Manual (Page 645)

AT-S62 Management Software Command Line Interface User’s Guide
Section VII: Management Security 645
SET MGMTACL
Syntax
set mgmtacl id= value [ipaddress= ipaddress ] [mask= string ]
[application=telnet|web|ping|all]
Parameters
id The identification number of the ACE to be modified. To
view the ID numbers of the existing ACEs, refer to
“SHOW MGMTACL” on page 646.
ipaddress Specifies a new IP address for the ACE.
mask Specifies a new mask for the ACE.
application Specifies the permitted type of remote management.
The options are:
telnet Permits Telnet management.
web Permits web browser management.
ping Permits the management workstation to ping
the switch.
all Permits all of the above.
You can specify more than one option by separating
them with a comma (for example, “Web,Ping”). The new
application replaces the current permitted application of
the ACE.
Description
This command modifies an existing management access control entry in
the Management ACL. You can use the command to change the IP
address, subnet mask, or permitted applications of an ACE.
Examples
The following command changes the IP address of ACE ID 22 to
169.254.134.247:
set mgmtacl id=22 ipaddress=169.254.134.247
The following command changes the permitted applications of ACE ID 45
to web browser and pinging:
set mgmtacl id=45 application=web,ping