beautypg.com

Allied Telesis AT-S62 User Manual

Page 84

background image

Chapter 3: Basic Switch Commands

84

Section I: Basic Operations

Note

To set the system name, administrator, or comments, refer to “SET
SYSTEM” on page 67.

ˆ

System Power - The status of the power voltages from the power
supply.

ˆ

System Temperature - The ambient air temperature as measured
where the air enters the cooling vents on the side of the switch.

ˆ

System Fan Speed - The speed of the cooling fans. The number of
fans vary by model. The AT-8516F/MT, AT-8516F/SC, and AT-8524M
switches have one fan, the AT-8524POE switch has five fans, and the
AT-8550GB and AT-8550SP switches have two fans.

ˆ

Main Power Supply - The status of the switch’s internal power supply.

ˆ

Redundant Power Supply - The presence of a connection between the
switch and an RPS unit. The status will be “Not Present” if the switch is
not connected to an RPS unit. If the switch is connected to an RPS
unit, the status will be “On,” even if the RPS module itself is powered
off.

Example

The following command displays information about the switch:

show system