Allied Telesis AT-S62 - Manual (Page 66)

Chapter 3: Basic Switch Commands
66 Section I: Basic Operations
SET SWITCH CONSOLETIMER
Syntax
set switch consoletimer= value
Parameter
consoletimer Specifies the console timer in minutes. The range is 1
to 60 minutes. The default is 10 minutes.
Description
This command sets the console timer, which is used by the management
software to end inactive management sessions. If the AT-S62 software
does not detect any activity from a local or remote management station
after the period of time set by the console timer, it automatically ends the
management session. This security feature can prevent unauthorized
individuals from using your management station should you step away
from your system while configuring a switch. To view the current console
timer setting, refer to “SHOW SWITCH” on page 80.
Example
The following command sets the console timer to 25 minutes:
set switch consoletimer=25