Allied Telesis AT-S62 User Manual
Page 252
Chapter 14: Event Log and Syslog Server Commands
252
Section II: Advanced Operations
The log can display its entries in chronological order (oldest to newest), or
reverse chronological order. The default is chronological order. To reverse
the order, use the REVERSE parameter.
The SEVERITY parameter displays entries of a particular severity. Table 9
defines the different severity levels. You can specify more than one
severity level at a time. The default is to display error, warning, and
informational messages.
PMIRR
Port mirroring
PSEC
Port security (MAC address-based)
PTRUNK
Static port trunking
QOS
Quality of Service
RADIUS
RADIUS authentication protocol
RPS
Redundant power supply
RTC
Real time clock
SNMP
SNMP
SSH
Secure Shell protocol
SSL
Secure Sockets Layer protocol
STP
Spanning Tree, Rapid Spanning, and Multiple
Spanning Tree protocols
SYSTEM
Hardware status; Manager and Operator log in
and log off events.
TACACS
TACACS+ authentication protocol
Telnet
Telnet
TFTP
TFTP
Time
System time and SNTP
VLAN
Port-based and tagged VLANs, and multiple
VLAN modes
WATCHDOG
Watchdog timer
Table 8. AT-S62 Modules (Continued)
Module Name
Description