Allied Telesis AT-S62 - Manual (Page 21)

AT-S62 Management Software Command Line Interface User’s Guide
21
Quality of Service - Policies
Added the following parameters to the
commands for creating and modifying
QoS policies:
ˆ TOS, MOVETOSTOPRIORITY and
MOVEPRIORITYTOTOS, as
defined above.
ˆ SENDTOMIRROR parameter for
copying traffic to a destination
mirror port. (This parameter only
applies to QoS policies.)
Chapter 17, “Quality of Service (QoS) Commands” on
page 281
Modified commands:
ˆ “CREATE QOS POLICY” on page 288
ˆ “SET QOS POLICY” on page 310
802.1x port-based network access control
Added the following new features to
802.1x authenticator ports:
ˆ MODE parameter for supporting
multiple supplicants on an
authenticator port.
ˆ GUESTVLAN parameter for
supporting Guest VLANs.
ˆ VLANASSIGNMENT and
SECUREVLAN parameters for
supporting dynamic VLAN
assignments from a RADIUS
authentication server for supplicant
accounts.
ˆ MACBASED parameter for
supporting MAC address-based
authentication as an alternative to
802.1x username and password
authentication.
Chapter 31, “802.1x Port-based Network Access
Control Commands” on page 553
Modified command:
ˆ “SET PORTACCESS|PORTAUTH PORT
ROLE=AUTHENTICATOR” on page 558
Management Access Control List
Simplified the commands for managing
the access control entries in the
Management ACL. Chapter 38, “Management ACL Commands” on page
637
Table 1. New Features in AT-S62 Version 1.4.0 (Continued)
Change Chapter and Command