Allied Telesis AT-S62 - Manual (Page 101)

AT-S62 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 101
SET DATE
Syntax
set date= dd-mm-yyyy
Parameter
date Specifies the date for the switch in day-month-year
format.
Description
This command sets the date on the switch. You can use this command to
set the switch’s date if you are not using an SNTP server.
Note
The system’s date when set with this command, are lost whenever
you power cycle or reset the switch. To avoid having to reenter the
date and time, you can configure the SNTP client software so that
the switch automatically obtains this information from an SNTP
server.
Example
The following command sets the switch’s date to May 11, 2006:
set date=11-5-2006