Allied Telesis AT-S62 - Manual (Page 135)

AT-S62 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 135
RESET SWITCH PORT COUNTER
Syntax
reset switch port= port counter
Parameter
port Specifies the port whose statistics counters are to be
returned to zero. You can specify more than one port at
a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command returns a port’s statistics counters to zero.
Example
The following command returns the counters on ports 14 and 15 to zero:
reset switch port=14-15 counter