Allied Telesis AT-S62 - Manual (Page 221)

AT-S62 Management Software Command Line Interface User’s Guide
Section II: Advanced Operations 221
UPLOAD METHOD=REMOTESWITCH
Syntax
upload method=remoteswitch
srcfile|file=”
filename ”|appblock|switchcfg
switchlist= switches [verbose=yes|no|on|off|true|false]
Parameters
method Specifies a switch to switch upload.
srcfile or file Specifies the source file to upload from the master switch
to the other switches. Options are:
filename Specifies the name of a configuration file
in the master switch’s file system.
Enclose the name in double quotes if it
contains spaces.
appblock Uploads the master switch’s active
AT-S62 image file.
switchcfg Uploads the master switch’s active boot
configuration file.
switchlist Specifies the destination switches for the uploaded file.
(To view the switches in an enhanced stack, see “SHOW
REMOTELIST” on page 92.) You can specify more than
one switch at a time (for example, 1,3,4).
verbose Specifies whether to display details of the upload
operation. The options are:
yes, on, true Display the upload details. The options are
equivalent.
no, off, false Do not display the upload details. The
options are equivalent.
Description
This command uploads a boot configuration file or an active AT-S62 file
image from a master switch to other switches in an enhanced stack. This
is refer to as a switch to switch upload.
This command offers a simply means for updating multiple switches in a
stack. For instance, to update switches with a new version of the AT-S62
image file, you can update the master switch first and then use a switch to
switch upload to update the other switches in the stack.