Allied Telesis AT-S62 - Manual (Page 511)

AT-S62 Management Software Command Line Interface User’s Guide
Section V: Virtual LANs 511
SET SWITCH MANAGEMENTVLAN
Syntax
set switch managementvlan= name | VID
Parameter
managementvlan Specifies the management VLAN. You can specify
the VLAN by name or by its VID. You can specify
only one management VLAN. The default
management VLAN is Default_VLAN (VID 1).
Description
This command sets the management VLAN. The switch uses this VLAN to
watch for management packets from remote Telnet, SSH, and web
browser management sessions. For background information on the
function of the management VLAN, refer to Chapter 24, “Port-based and
Tagged VLANs” in the AT-S62 Management Software Menus Interface
User’s Guide. To determine the current management VLAN, use the
SHOW SWITCH command.
Example
The following command sets the TechSupport VLAN as the management
VLAN:
set switch managementvlan=TechSupport