beautypg.com

Stacking menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 83

background image

AlliedView™-EMS 3.11 Device Management Guide

Page 83 of 402

Spanning Tree Info

Displays the port's spanning tree parameters.

Enable

Enables the port.

Disable

Disables the port.

Port Mirroring

Displays port mirroring parameters and allows configuration of port mirroring state,

source, and destination.


IGMP Snooping

Displays the current state of IGMP Snooping and allows reconfiguration.

Note

- Valid MIB Set values for the IGMP Report Delay parameter should range from

5 to 30. However, the current firmware version does not allow it to be set to a

value greater than 10. Attempting to do so will result in the error message: "The

error occurred with 'Set' operation. Error: bad value."

Stacking Menu

From the Stacking menu, you can view basic switch information as well as stacking
information.

Stacking Info

Displays information such as Hardware Version, Firmware Version, Expansion Slot,
and Role In System for all switches in the stack.


AT-8324SX