Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 313)

AlliedView™-EMS 3.11 Device Management Guide Page 313 of 402
Load Parameters
Displays information about the files to be loaded.
DHCP Ranges
Displays information about the DHCP module.
Ping Polling
Ping Status
Displays the status of the Ping polling.
Note - Since the Address parameter cannot be configured, the Ping Status parameter
cannot also be configured.
Ping Parameters
Displays basic information of the Ping module.
Note - The current firmware version accepts values in the range [1-4294967595]
inclusive for the Number of Packets and Time Interval parameters.
Note - Valid MIB Set values for the Timeout parameter should range from 1 to
65535. However, the current firmware version allows the user to enter values in the
range [-65535 to -1, 1 to 65535] inclusive. Attempting to enter values greater than
65535 will cause the new value to be converted to its equivalent wrap-around value;
i.e., 65536 will become 0, 65537 will become 1, and so on.
Note - Valid MIB Set values for the Number of Packets parameter are in the range
[1-4294967295] inclusive. However, attempting to enter values greater than
2147483647 will cause the new value to be converted to its equivalent wrap-around
value; i.e., 2147483648 will become -2147483648, 2147483649 will become -
2147483647, and so on.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Address parameter will not be configurable and will display a
sequence of bytes in hexadecimal format instead of the actual destination of ping
packets.
Ping Statistics
Displays statistics of the Ping polling.
Reset Cold
Initiates a cold restart on the switch.
Reset Warm
Initiates a warm restart on the switch.
Reset Info
Displays information about the restart.