Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 30)

AlliedView™-EMS 3.11 Device Management Guide Page 30 of 402
RMON Menu
From the RMON menu you can view and edit the RMON MIB.
Statistics
Standard
Displays traffic statistics in the network segment attached to each port.
Note - To collect statistical data on an interface, do the following using a MIB
browser tool that allows you to issue an SNMP Set request on a specific table
element:
• Set the etherStatsStatus (1.3.6.1.2.1.16.1.1.1.21) object to "createRequest(2)"
• Set the etherStatsDataSource (1.3.6.1.2.1.16.1.1.1.2) object to the OID of the
Ethernet interface to monitor (e.g. 1.3.6.1.2.1.2.2.1.1.1 - Port 1)
• Set the etherStatsStatus object to "valid(1)"
Additional Info
Displays additional traffic statistics in the network segment such as frames
received/sent, collisions, broadcast frames and multicast frames.
Note - The Deferred Transmissions parameter is not applicable to the AT-
8000/8POE and should be ignored.
Error
Displays error statistics in the network segment such as CRC errors, alignment
errors, bad frames received late collisions and total transmit errors.
History Control Table
Displays the RMON History table.
Note - To maintain a history of statistics taken at particular intervals for an interface,
do the following using a MIB browser tool that allows you to issue an SNMP Set
request on a specific table element:
• Set the historyControlStatus (1.3.6.1.2.1.16.2.1.1.7) object to
"createRequest(2)"
• Set the historyControlDataSource (1.3.6.1.2.1.16.2.1.1.2) object to the OID of
the Ethernet interface for which historical data will be collected (e.g.
1.3.6.1.2.1.2.2.1.1.1 - Port 1)
• Set the historyControlStatus object to "valid(1)"
Alarm Table
Displays the RMON Alarm table.