Bridge menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 268

AlliedView™-EMS 3.11 Device Management Guide
Page 268 of 402
Displays the IP routing table on the switch.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
Note
- The current firmware version does not allow the Default TTL parameter to
be configured.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Note
- L2+ Models: Changes to the Forwarding Database table caused by dynamic
network topology/configuration changes will not be reflected unless the device is
restarted.
Note
- Forwarding Database table entries for aggregated ports do not reflect the
correct port number in the Port Number column.
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info