Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 381)

AlliedView™-EMS 3.11 Device Management Guide Page 381 of 402
Forwarding Database
Displays the Forwarding Database table.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Security Menu
From the Security menu, you can view security settings information.
Authentication Info
Displays security authentication information.
Note - Values for the Radius IP and Radius Key parameters are displayed as octet
strings. However, these parameters accept input values in IP address format and text
string format respectively.
Note - Configuring the parameters under this table will result in the error message:
"The error occurred with 'Set' operation. Error: time out occurred." However, new
values are still set successfully.
Note - Values set on port 3 (wlan0) will also be set on port 6 (wlan1) and vice versa.
Note - Device Manager allows the user to enter more than 255 characters for the
Radius Key parameter. However, the current firmware version truncates it to 32
characters.
Wi-Fi Menu
From the Wi-Fi menu, you can view wireless LAN information.
Station Management Attributes
Station Config
Displays station configuration attributes.