Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 53)

AlliedView™-EMS 3.11 Device Management Guide Page 53 of 402
Note - The current firmware version returns a "noSuchName" value for the
Received Frames (HC) and Transmit Frames (HC) parameters.
Port Trunking
Basic Info
Displays basic information about port trunking.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
Balancing Criteria
Displays information about Aggregate Index.
Note - The current firmware version does not allow the Balance Layer, Used
Addresses and Broadcast Type parameters to be configured.
Aggregator Info
Displays information about every Aggregator that is associated with this system.
Note - Valid MIB Set values for the Actor Administrative Key parameter are in the
range [1 - 65535] inclusive. Attempting to set this parameter to a value outside of
the valid range will result in the error message: “The error occurred with ‘Set’
operation. Error: bad value.”
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Aggregation Port Info
Displays a list of Link Aggregation Control configuration parameters for each
Aggregation Port on this device.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - Device Manager does not handle 8-bit string parameters correctly. As a result,
the Actor Administrative Status and Partner Administrative Status parameters will
display unrecognizable values and will not be configurable. The Actor Operational
Status and Partner Operational Status parameters will also display unrecognizable
values.
Note - The current firmware version does not allow the Actor Administrative Key
and Partner Administrative System ID parameters to be configured.
Storm Control
Basic Info
Displays basic information about storm control.