beautypg.com

Bridge menu, Atm menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 144

background image

AlliedView™-EMS 3.11 Device Management Guide

Page 144 of 402

Route Table

Displays the IP routing table on the router.


IP Statistics

Displays statistics about IP routing, including the number of IP datagrams received.


ICMP Statistics

Displays ICMP statistics.

Bridge Menu

From the Bridge menu, you can view and edit bridge information such as the forwarding

database and spanning tree status. The Bridge submenus are greyed out if bridges not

configured.

Discard/Aging Time Info

Displays information about the number of address entries that were learned but

discarded because either there was a lack of memory or the entry's aging timer

expired.


Spanning Tree Info

Displays spanning tree parameters such as priority and cost.

ATM Menu

From the ATM menu you can view and edit ATM information. The ATM instance submenus
are greyed out if no ATM instances are configured. The ATM channel submenus are greyed

out if no ATM channels are configured.

Instance Configuration

Displays ATM Instance configuration information.

Note

- The current firmware version does not allow the following parameters to be

configured:

Max VPC

Max VCC

Max Active VPI Bits

Max Active VCI Bits

ILMI VPI

ILMI VCI

Neighbor IP Address

Neighbor Name


Attempting to configure these parameters will result in the error message: "The

error occurred with 'Set' operation. Error: noSuchName."