Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 220)

AlliedView™-EMS 3.11 Device Management Guide Page 220 of 402
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port or group
of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
LLDP Menu
From the LLDP menu, you can view and edit LLDP information such as the LLDP Port
Configuration and Local System Data.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port Config
Displays LLDP configuration for each port.