Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 383)

AlliedView™-EMS 3.11 Device Management Guide Page 383 of 402
PHY Attributes
Operation
Displays PHY level attributes concerned with operation.
Note - Valid MIB Set values for the Current Regulatory Domain parameter are in the
range [0-2147483647] inclusive.
Antenna
Displays PHY level attributes concerned with Antenna.
Note - The current firmware version does not allow the parameters under this table
to be configured.
Transmit Power
Displays transmit power information.
Note - The current firmware version does not allow the Current Transmit Power
parameter to be configured.
DSSS
Displays Direct Sequence Spread Spectrum information.
Note - The current firmware version does not allow the parameters under this table
to be configured.
Supported Regulatory Domains
Displays the supported regulatory domains the PLCP and PMD support in this
implementation.
Antenna List
Displays antenna list information.
Note - The current firmware version does not allow the parameters under this table
to be configured.
Supported Transmit Data Rates
Displays the Transmit bit rates supported by the PLCP and PMD.
Supported Receive Data Rates
Displays the Receive bit rates supported by the PLCP and PMD.
OFDM
Displays orthogonal frequency division multiplexing information.
Note - The current firmware version does not allow the T1 Threshold parameter to
be configured.