Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 283)

AlliedView™-EMS 3.11 Device Management Guide Page 283 of 402
o
AS Border Router Status
o
Type of Service Support Status
o
Ext Link State DB Limit
o
Multicast Extensions
o
Exit Overflow Interval
o
Demand Extensions
Area Info
Displays the configured parameters and cumulative statistics of the device's attached
areas.
Note - The Authentication Type parameter is not applicable to the AT-9700 Series
and should be ignored.
Stub Area Config
Displays the set of metrics that will be advertised by a default Area Border Router
into a stub area.
Note - The current firmware version does not allow the Row Status and Metric Type
parameters to be configured.
Link State Ads
Displays the OSPF Process' Link State Database.
Note - The Link State Ads sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Host Info
Displays the list of hosts, and their metrics, that the device will advertise as host
routes.
Note - The current firmware version does not allow the Metric parameter to be set
to 0.
Interface Info
Displays the interfaces from the viewpoint of OSPF.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Type
o
Transit Delay
o
Retransmission Interval
o
Multicast Forwarding
o
Demand
o
Authentication Type