Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 128

AlliedView™-EMS 3.11 Device Management Guide
Page 128 of 402
Attempting to configure these parameters will result in the error message: "The
error occurred with 'Set' operation. Error: gen Error."
Virtual Path Link (VPL)
Displays configuration and state information for a bi-directional Virtual Path Link.
Note
- The Virtual Path Link (VPL) sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
Virtual Channel Link (VCL)
Displays configuration and state information for a bi-directional Virtual Channel Link.
Note
- AT-AR240E : The current firmware version does not allow the following
parameters to be configured:
•
Administrative Status
•
Receive Traffic Descriptor Index
•
Transmit Traffic Descriptor Index
•
AAL Type
•
AAL5 CPCS Transmit SDU Size
•
AAL5 CPCS Receive SDU Size
•
AAL5 Encapsulation Type
Attempting to configure these parameters will result in the error message: "The
error occurred with 'Set' operation. Error: gen Error".
Note
- AT-AR240E: The Port Number parameter and the Virtual Channel Link
(VCL) parameters are not relevant and should be ignored.
Note
- AT-AR240E : The current firmware version does not allow the Status
parameters to be configured. Attempting to configure them will result in the error
message: "The error occurred with 'Set' operation. Error: bad value." or "The error
occurred with 'Set' operation. Error: gen Error".
Note
- AT-AR250E/AT-AR255E : The Virtual Channel Link (VCL) sub-menu option
does not display the correct parameters. Instead, it displays the sub-menu option
name as a parameter with a value of 'noSuchName'.
Virtual Path (VP) Cross Connect
Displays configuration and state information of all point-to-point , point-to-
multipoint, or multipoint-to-multipoint VP cross connect.
Note
- The Virtual Path (VP) Cross Connect sub-menu option does not display the
correct parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.