Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 355)

AlliedView™-EMS 3.11 Device Management Guide Page 355 of 402
Management Module Temperature
Displays the actual temperature of the management module.
Chassis Temperature
Displays the actual temperature of the chassis.
Power Info
Displays power supply voltage information.
Battery Voltage
Displays the battery voltage information.
Omega
Displays Omega management interface information, including time-out and port
status (RS-232 and 10Base-T).
Telnet
Starts a Telnet connection to the chassis.
Status Menu
From the Status Menu, you can view and edit information about PowerBlade Modules
installed on the chassis. Options to view all/per module information are displayed.
Note - The current firmware version does not allow the Module Name parameter to be set
to NULL. Attempting to set this parameter to NULL will only set it to its default value.
Note - The Module Type parameter returns 0 for the management module (19), main power
supply (20), and optional redundant power supply (21).
Note - The same set of parameters is displayed for each module regardless of whether or
not each parameter is applicable to the module.
PowerBlade