Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 316)

AlliedView™-EMS 3.11 Device Management Guide Page 316 of 402
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
LLDP Menu
From the LLDP menu, you can view and edit LLDP information such as the LLDP Port
Configuration and Local System Data.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port Config
Displays LLDP configuration for each port.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
• Bit 0 : Port Description
• Bit 1 : System Name
• Bit 2 : System Description
• Bit 3 : System Capabilities