Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 284)

AlliedView™-EMS 3.11 Device Management Guide Page 284 of 402
o
Authentication Key
o
Authentication Key ID
o
Row Status
Interface Metric
Displays the Type of Service metrics for a non-virtual interface.
Note - The current firmware version does not allow the Value parameter to be set
to 0.
Virtual Interface Info
Displays information about this device's virtual interfaces.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Authentication Type
o
Authentication Key
o
Authentication Key ID
Neighbor Info
Displays the non-virtual neighbor information.
Note - The Neighbor Info sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Virtual Neighbor Info
Displays the virtual neighbor information.
Note - The Virtual Neighbor Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
External Link State Ads
Displays the OSPF Process' Link State Database containing only the External Link
State Advertisements.
Area Aggregate Info
Displays the range of IP addresses specified by an IP address/IP network mask pair .
DVMRP
Basic Info
Displays basic information about Distance Vector Multicast Routing Protocol.
Interface Info
Displays a list of the device's multicast capable interfaces.