Security menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 169

AlliedView™-EMS 3.11 Device Management Guide
Page 169 of 402
Virtual Balancers
Displays virtual balancers information.
Affinity Tables
Displays load balancer affinities information.
Open TCP Connections
Displays open TCP connections information.
Ping Polling
Ping Status
Displays the status of the Ping polling.
Note
- The current firmware version does not allow the Ping Status parameter to be
configured.
Ping Parameters
Displays basic information of the Ping module.
Note
- Valid MIB Set values for the Number of Packets parameter should range from
0-4294967595. However, the current firmware version allows the user to enter
negative values as well. Furthermore, attempting to set the parameter to 0 will
result in the error message: "The error occurred with 'Set' operation. Error: bad
value."
Note
- The current firmware version accepts values in the range [0-4294967595]
inclusive for the Number of Packets and Time Interval parameters.
Note
- Valid MIB Set values for the Timeout parameter should range from 1 to
65535. However, the current firmware version allows the user to enter values in the
range [-65535 to -1, 1 to 65535] inclusive. Attempting to enter values greater than
65535 will cause the new value to be converted to its equivalent wrap-around value;
i.e., 65536 will become 0, 65537 will become 1, and so on.
Note
- The current firmware version does not allow the Address parameter to be
configured.
Ping Statistics
Displays statistics of the Ping polling.
Security Menu
From the Security menu, you can view and edit port access entity information such as the
PAE port information and the Supplicant PAE information.