Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 318)

AlliedView™-EMS 3.11 Device Management Guide Page 318 of 402
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the Capabilities parameter will display an 8-bit binary string instead of the actual PAE
functionality supported. However, the PAE functionality supported can still be
determined by looking at the bits that are on from right to left:
• Bit 0 : Authenticator
• Bit 1 : Supplicant
Enterprise
Displays enterprise PAE port information.
Authenticator PAE Info
Standard
Displays standard authenticator PAE information.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - The Administrative Controlled Directions and Key Transmission Status
parameters are implemented as 'read-only'.
Enterprise
Displays enterprise authenticator PAE information.
Authenticator PAE Statistics
Standard
Displays standard statistics for the PAE Authenticator.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Enterprise
Displays enterprise statistics for the PAE Authenticator.
Supplicant PAE Info
Displays supplicant PAE information.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Supplicant PAE Statistics
Displays the statistics for the PAE supplicant.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.