Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 31)

AlliedView™-EMS 3.11 Device Management Guide Page 31 of 402
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays port statistics such as the number of packets received and transmitted on
the port, bytes received and transmitted on the port and port status.
Note - The current firmware version returns a NULL value for the Specific Media
MIB parameter.
Additional Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port and port status.
Note - The Deferred Transmissions parameter is not applicable to the AT-
8000/8POE and should be ignored.
Error Statistics
Displays error statistics.
Detail Info
Displays detailed port information such as duplex mode.
Note - The current firmware version does not return the correct value for the Port
State parameter. It also does not allow the parameter to be configured.
Note - The Port Flow Control and Port QoS Priority parameters are not applicable
to the AT-8000/8POE and should be ignored.
Spanning Tree Info
Displays the port's spanning tree parameters.
Enable
Enables the port.