Stacking menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 273

AlliedView™-EMS 3.11 Device Management Guide
Page 273 of 402
Land Config
Displays land attack type configuration
IP Option Config
Displays IP option attack type configuration
Teardrop Config
Displays teardrop attack type configuration
Ping Death Config
Displays ping of death attack type configuration
Stacking Menu
From the Stacking menu, you can access slave switches and other Master switches in the
enhanced stack.
Stacking Info
Displays Enhanced Stacking parameters, allows you to set the switch's enhanced
stacking status and select a switch to manage in the enhanced stack.
Note
- Attempting to connect to an AT-9424T, AT-9424Ts or an AT-9424Ts/XP
slave from any master device that supports Enhanced Stacking will result in the error
message: "The error occurred with 'Set' operation. Error: gen Error".
Note
- Attempting to connect to an AT-8400 slave from an AT-9400 master will
result in the error message: "The error occurred with 'Set' operation. Error: gen
Error".
Note
- Connecting to an AT-9408LC/SP or to an AT-9424T/SP slave from any
master device that supports Enhanced Stacking can only be done once. Once the
management session is returned to the master device, any attempt to reconnect to
these slave devices will fail.
AT-9400 Series