Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 172)

AlliedView™-EMS 3.11 Device Management Guide Page 172 of 402
Port Menu
From the Port menu, you can view and edit MIB information about selected ports.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status. This table also
displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port speed.
Note - The current firmware version returns a 'noSuchName' value for the Port
Alias and Counter Discontinuity Time parameters.
Note - Valid MIB Set values for the Administration Status parameter are 'up' and
'down' only.
Note - The Promiscuous Mode parameter is implemented as 'read-only'.
Detail Info
Displays detailed port information such as duplex mode.
Note - AT-AR770S: The current firmware version always returns 'half-duplex' for the
Duplex Mode parameter regardless of the actual duplex mode of the port.
Error Statistics
Displays error statistics.
Note - The Ethernet Chip Set, Symbol Errors and Duplex Status parameters are not
applicable to the AT-AR700S series and should be ignored.
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-AR700S series and should be ignored.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.