Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 240

AlliedView™-EMS 3.11 Device Management Guide
Page 240 of 402
Detail Info
Duplex Mode
Displays the duplex mode of the ports.
Bandwith Limits
Displays bandwidth limits of the switch ports.
Error Statistics
Displays error statistics.
Note
- The following parameters are not applicable to AT-Rapier48w and should be
ignored:
• Ethernet Chip Set
• Symbol Errors
• Duplex Status
Spanning Tree Info
Displays the port's spanning tree parameters.
MAU Info
Displays interface-related MAU information for the port.
Note
- The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-Rapier48w and should be ignored.
Note
- The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note
- The following parameters are not applicable to the AT-Rapier48w and should
be ignored:
• Capability Bits
• Advertised Bits
• Received Bits
• Remote Fault Advertised
• Remote Fault Received
Note
- The Administration Status, Advertised Negotiation Capability and Restart
parameters are implemented as 'read-only'.
Port Trunking
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.