Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 250)

AlliedView™-EMS 3.11 Device Management Guide Page 250 of 402
Displays statistics about IP routing, including the number of IP datagrams received.
ICMP Statistics
Displays statistics about ICMP, including the number of ICMP datagrams received.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Frame Relay Menu
From the Frame Relay menu you can view and edit Frame Relay information. The Frame
Relay submenus are greyed out if the Frame Relay is not configured.
Note - The Frame Relay Menu does not apply to the Rapier 48, Rapier 48i, Rapier G6,
Rapier G6F-LX/SC, Rapier G6F-SX/SC and Rapier G6F-SX/MT.
DLCMI Info
Displays DLCMI (Data Link Connection Management Interface) information.
Circuit Info
Displays Frame Relay circuit statistics.
Error Info
Displays information about errors related to the Frame Relay module.