Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 123)

AlliedView™-EMS 3.11 Device Management Guide Page 123 of 402
Note - The port speed displayed on the Ethernet port images is always '100' even if the
Ethernet port is connected to a 10Mbps port on another device.
Note - The four Ethernet ports on the AT-AR250E and AT-AR255E operate as a single port.
As a result, even if connection is established on just one port, all four ports will turn green.
Note - Expect the ADSL port to be green even if there is no physical connection established.
Note - The current firmware version does not allow you to disable the Ethernet ports.
Note - The current firmware version does not allow you to manually configure the speed of
the Ethernet ports.
Agent Menu
From the Agent menu, you can view and edit the system information for the router, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version returns 'enterprises' instead of the actual OID
of the device for the System Unique Object ID parameter.
Note - Clicking on the 'Set MIB Value' button several times when configuring System
Info parameters will result in the error message: "The error occurred with 'Set'
operation. Error: time out occurred."
Note - The current firmware version does not allow System Info parameters to be
configured at the same time. Attempting to do so will result in the error message:
"The error occurred with 'Set' operation. Error: time out occurred."
Telnet
Starts a Telnet connection to the router.
WEB Browser
Connects to the router's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the router's IP routing
functions.