Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 170)

AlliedView™-EMS 3.11 Device Management Guide Page 170 of 402
Port-based Authentication
Authentication Status
Displays the status of the port-based authentication.
PAE Port Info
Standard
Displays standard PAE port information.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the Capabilities parameter will display an 8-bit binary string instead of the actual PAE
functionality supported. However, the PAE functionality supported can still be
determined by looking at the bits that are on from right to left:
• Bit 0 : Authenticator
• Bit 1 : Supplicant
Enterprise
Displays enterprise PAE port information.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the Capabilities parameter will display an 8-bit binary string instead of the actual PAE
functionality supported. However, the PAE functionality supported can still be
determined by looking at the bits that are on from right to left:
• Bit 0 : Authenticator
• Bit 1 : Supplicant
Authenticator PAE Info
Standard
Displays standard authenticator PAE information.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - The Administrative Controlled Directions and Key Transmission Status
parameters are implemented as 'read-only'.
Enterprise
Displays enterprise authenticator PAE information.
Authenticator PAE Statistics
Standard
Displays standard statistics for the PAE Authenticator.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.