Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 379)

AlliedView™-EMS 3.11 Device Management Guide Page 379 of 402
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version accepts up to 254 characters for the System
Contact, System Name and System Location parameters.
Firmware Info
Displays upgrade firmware information, including SNMP Firmware, TFTP Server IP
Address and Firmware Filename.
Note - Values for the TFTP Server IP Address parameter are displayed as octet
strings. However, this parameter accepts input values in IP address format.
Note - The current firmware version accepts up to 254 characters for the Firmware
Filename parameter.
Note - Attempting to set the Firmware Filename parameter to more than 34
characters will result in the error message: "The error occurred with 'Set'
operation. Error: timeout occurred." However, the new value is still set successfully.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Address Table
Displays the list of IP interfaces on the switch.