Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 219)

AlliedView™-EMS 3.11 Device Management Guide Page 219 of 402
Destination Metric 1
Destination Metric 2
Destination Metric 3
Destination Metric 4
Destination Metric 5
Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note - The Default TTL parameter is implemented as 'read-only'.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
BGP
General Info
Displays information about the BGP module.
Peer Info
Displays BGP Peer information.
Note - The current firmware version does not allow the following parameters to be
configured:
Connect Retry Interval
Configured Hold Time
Configured Keep Alive
Min AS Origination Interval
Min Route Advertisement Interval
Path Attributes
Displays the BGP path attributes.