Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 43)

AlliedView™-EMS 3.11 Device Management Guide Page 43 of 402
CIDR
Route Number
Displays the number of valid CIDR entries.
Route Table
Displays the CIDR routing tables.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Destination Port Number
o
Routing Protocol MIB
o
Destination Metric 2
o
Destination Metric 3
o
Destination Metric 4
o
Destination Metric 5
Note - The current firmware version does not allow the Routing Type parameter to
be set to ‘local’ for all models except the AT-8000S/16. For the AT-8000S/16, the
Routing Type parameter cannot be set to ‘remote.
ICMP
ICMP Statistics
Displays ICMP Statistics.
Error Messages
Displays the variable that controls the ability to generate ICMP error messages.
DNS Resolver
Resolver Config
Displays information about the DNS client.
Note - The current firmware version does not allow the Reset parameter to be set
to "reset".
Basic Counters
Displays information about basic DNS couters.
Counters by OpCode
Displays information about the current count of resolver queries and answers.
Counters by Response Code
Displays information about the current count of responses to resolver queries.
Lame Delegation Overflows
Displays information about number of times the resolver attempted to add an entry
to the lame delegation table.