Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 392)

AlliedView™-EMS 3.11 Device Management Guide Page 392 of 402
Note - AT-WA7501: The Supported Transmit Data Rates sub-menu option does not
display the correct parameters. Instead, it displays the sub-menu option name as a
parameter with a value of 'noSuchName'.
Supported Receive Data Rates
Displays the Receive bit rates supported by the PLCP and PMD.
Note - AT-WA7501: The Supported Receive Data Rates sub-menu option does not
display the correct parameters. Instead, it displays the sub-menu option name as a
parameter with a value of 'noSuchName'.
OFDM
Displays attributes for Orthogonal Frequency Division Modulation.
Port Menu
From the Port menu, you can view and edit MIB information about selected ports.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays port information such as the number of packets received and transmitted
on the port, bytes received and transmitted on the port, and port status.
Note - The current firmware version does not allow the Administration Status
parameter to be configured.
Extended Interface Info
Displays additional port information.
Port State Info
Displays port status information.
Port Statistics
Displays port statistics.
Port Transmit Queue Info
Displays port transmit queue information.
Pending Message Info
Displays pending messages information.
Error Statistics
Displays error statistics for the ethernet port.