Rmon menu – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 74

AlliedView™-EMS 3.11 Device Management Guide
Page 74 of 402
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because of lack memory or the entry's aging timer has expired.
Note
- The current firmware version accepts values in the range [8-512] inclusive for
the Aging Time parameter. However, if the value entered is not a multiple of 8, the
firmware will convert it to the largest multiple of 8 less than the entered value.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note
- When STP/RSTP is enabled, the current firmware version sets the Port State
parameter of all inactive ports to 'blocking'. As a result, inactive ports will turn
yellow in Device Manager.
Note
- When enabling/disabling STP/RSTP, connection to the AT-8324 is temporarily
lost. As a result, the following error message appears: "The error occurred with 'Set'
operation. Error: time out occurred." This will not affect the application in any way.
Statistics
Displays statistics about frames received/transmitted on the switch's ports.
RMON Menu
From the RMON menu you can view and edit the RMON MIB.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON History table.
Note
- The current firmware version is unable to retrieve the correct information
for the History Control Table. As a result, the following error message appears:
"Failed to get MIB data."
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.